Paver sealing for St. Augustine homes
Paver Sealing in St. Augustine, FL
St. Augustine streets flood when rain meets high tide, so call (386) 337-3172 for a free paver sealing estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in St. Augustine
Paver sealing in St. Augustine is available for driveways, courtyards, walkways and pool decks, from the old city blocks to the newer streets beyond downtown. A local contractor washes the pavers, refills the joints with sand and applies the sealer. A reply to your request arrives within 1 business day, usually much sooner, after you request your free estimate.
Think about a brick-red courtyard that has turned dull and gray, with a green stripe along the wall and gaps in the joints. After a wash, new sand and a coat, the same courtyard looks like it did on day one. Want to describe yours first? Call (386) 337-3172 and say what you see.
Much of the city sits low enough that tides and rain meet, which shapes how a job goes. A contractor who works the city knows to ask about it. A free visit shows what your pavers need and what it would cost, so request your free estimate when you are ready.
Why hire a local paver sealing contractor in St. Augustine?
Low ground and old walls shape every paver job in this city. A local contractor has seen both, so request your free estimate and ask what applies to your property.
A free walk-through
The contractor visits your St. Augustine property at no charge and writes the price down. The quote stays yours even if you hire no one.
A range to check bids against
Companies in this region publish $1.50 to $3.00 per square foot to clean, sand and seal. Use it as your yardstick.
Gentle methods near old walls
Coquina and historic stucco call for soft washing. Tell the contractor what stands beside your pavers.
Your call
The date and the finish are yours to pick. An estimate is only a number.
Get Your Free Estimate in St. Augustine
Tell us about your pavers in St. Augustine.
Free, no obligation
What paver problems show up most in St. Augustine?
Rain and tide on the same low ground
The city says flooding happens when regular rain lines up with high tides, and about 90 percent of residents live in a floodplain. A Flagler College report adds that normal rainfall now floods streets that once needed large storms. Water that stands on pavers leaves silt and slows drying. Sealer only goes on a dry, clean surface. On a low lot, that can mean waiting out a tide cycle or two before work starts.
Silt left behind after high water
Matthew in 2016 flooded Davis Shores, Lincolnville, the Historic Districts and parts of Abbott Tract. Irma flooded many of the same areas in 2017. Floodwater leaves a thin layer of fine dirt in joints and on top of pavers, and the dirt stays damp for days. That layer has to be washed off, since a coat laid over it would hold it in. A thin tan or gray film on a driveway after a flood is the usual sign.
Salt that shortens the time between coats
A St. Augustine paver company says salt air from the Matanzas River and bay can crystallize in paver pores. It puts the reseal cycle at two to three years near the water, against about four elsewhere. That means a courtyard near the bay may need attention sooner than one inland, and a driveway in the sun may need it sooner still. Ask about distance from the water on the first visit. The answer helps you plan the next recoat.
Old stone and stucco beside the pavers
Coquina built the Castillo de San Marcos and much of the old city. Safe Touch says coquina and historic stucco need soft-wash methods rather than pressure. A hard spray can chip a wall that has stood for a century, and stucco that is already cracked can let go in sheets. A careful wash near those surfaces takes longer but protects them. If a wall already has loose stucco, mention it so the crew keeps well away.
Joint sand that drains away
St. Augustine gets about 50.64 inches of rain a year, with the wet season running May through October. Heavy rain pulls sand out of the seams. Gaps let in weeds and water, and wide ones let pavers shift under weight. Fresh sand is the first repair and goes in before any sealer. Full joints also hold pavers in line when tires roll over them.
Does it matter where in St. Augustine my pavers are?
Yes, because the low parts of the city behave differently from the high parts. The city lists Davis Shores, Lincolnville, the Historic Districts and parts of Abbott Tract as areas Matthew flooded. A courtyard there may carry silt, while a driveway on higher ground may not, and the cleaning plan changes with it, down to how long the pavers need to drain. Tell the contractor your neighborhood when you request your free estimate.
Lincolnville has significant flooding near the Quarry Creek area, according to Flagler College's student paper, and Santa Rosa near the San Sebastian River floods during King Tides. Riberia Street had to close in October 2025. If your street is near the river or a creek, call (386) 337-3172 and mention it, along with any flooding you remember.
The old city has its own rules, and the Castillo, Flagler College and the Lightner Museum remind you how much history sits in a few blocks. The city's pages do not say sealing pavers needs approval, so a quick call to city staff is the safe step, and it takes only a few minutes. Ask before work starts, then request your free estimate to get a price.
Outside the historic blocks, the city has newer streets with their own mix of homes. Some have large driveways, some have pool cages, and some have small side patios. The work scales with the layout, so photos help the first answer. Send a couple when you request your free estimate.
What does paver sealing cost in St. Augustine?
Paver companies across this region post prices of $1.50 to $3.00 per square foot for the wash, sand and seal. A St. Augustine company says prep moves the price more than the sealer. Silt after a flood, a failed old coat and gentle washing beside coquina all add prep time, and prep time is what you pay for. To see where your yard falls, request your free estimate.
Size matters too, since a wide driveway has more area than a small courtyard but may cost less per square foot. Tight lots in the old city also slow the work, since gear is carried in by hand and rinse water has to be managed. Call (386) 337-3172 and the contractor can talk through which items apply.
A written quote should name the area in square feet, the steps included and the finish. With those three lines you can compare any two bids fairly. If a number looks far from the published range, ask why. To get a quote for your property, request your free estimate.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in St. Augustine?
Look at the ground, the walls and the old coat
The contractor starts by watching where rain leaves your pavers and where it stands. The walls and trim nearby are noted, especially coquina or stucco. Past sealer is identified, since the two sealer types do not mix, and any failing film is noted for removal. Dips and lifted pavers are marked for repair, because sealer over a dip only preserves it. Photos of the area help the planning, and so do notes on when the pavers were laid.
Wash with the right pressure
Cleaning removes algae, salt film and silt. A trade supplier warns that more than 3,000 PSI on standard concrete pavers risks stripping the surface. Near old walls the wash is softer. Flower beds and doors are protected from spray, and runoff is guided away from walls.
Refill every joint with sand
Washing pulls sand from the seams, so it is replaced, and the amount used tells you how empty the joints had become. The contractor sweeps it in until the joints are full and then cleans the surface. Full joints lock the pavers together and slow weeds. On a low lot, this step matters after every flood, since water pulls sand out the same way rain does.
Let the pavers dry
Sealer needs a dry surface, and St. Augustine's damp air and tides slow drying. The contractor waits for a dry forecast. Pavers near standing water can take extra hours. A patient start avoids a cloudy coat, and a cloudy coat has to be redone.
Apply the finish and set the wait
Sealer is applied in the finish you chose, and wet look scuffs sooner than matte. Cars stay off for about a day. The contractor tells you when walking is fine, and when the drive is ready for a car. Ask for the product name so the next coat matches, and keep it with your house records.
Complete paver services in St. Augustine
A St. Augustine job follows a clear path: wash, sand, dry, seal. Washing clears silt and salt, and sand fills the seams. The coat goes on last so nothing gets locked underneath, and low lots may need extra drying time between steps. To hear how long each step might take, call (386) 337-3172.
Driveways, courtyards, walkways and pool decks are common here, and many sit beside old walls. Courtyards near coquina or stucco need the gentlest wash, and the contractor may work in small sections to keep spray off the wall. Pool decks often get a grip additive. List every surface when you request your free estimate, even small ones like steps and edging.
Water-based and solvent-based sealers do not mix, and the old coat decides which one can go on. Quotes run two to five years between coats, and salt air near the bay pushes the number down. Ask whether matte or wet look suits your pavers, since a shady courtyard may suit a different finish than a bright driveway. For an answer, call (386) 337-3172.
Weather sets the calendar, and the wet season runs from May through October. Low streets can hold water after a rain, while drier months leave more open days. To pick a window that avoids the worst tides, request your free estimate.
Questions to ask before you hire
- What do you do if a summer storm rolls in halfway through the job?
- Pine needles and oak leaves keep landing on my driveway, so how soon after sealing can I sweep them off?
- Can you give me a day and a time window so I can be home to walk the job?
- How long before the color starts to look dull again, and when should I call for a re-seal?
- Is a satin or a wet look better for pavers that get full afternoon sun?
- Can you tell me in writing how many square feet you measured and what price per square foot that gives?
- Can you wash and seal the back patio even if the screen enclosure is in the way?
What do sealed pavers look like around St. Augustine?
Why local matters in St. Augustine
A contractor who works St. Augustine knows which streets hold water and when. That shapes how much cleaning comes first. Someone from outside the city may not ask about tides, creeks or old drains. To reach a local contractor, call (386) 337-3172.
Local work also means gentle care near old stone. Coquina and historic stucco are part of daily life here, and a contractor who has worked beside them knows to use soft methods and slow passes. You can request your free estimate and mention what stands beside your pavers.
Timing is local too. King Tides and nor'easters can flood a street, and afternoon storms arrive in summer. A local contractor reads the calendar and the tide chart, and builds in a spare day. When you are ready, request your free estimate and ask how the schedule would work.
Does it help to hire someone who knows St. Augustine?
Yes, because few Florida cities have this much history in so little space. Spanish settlers founded St. Augustine on September 8, 1565, and the Castillo de San Marcos took from 1672 to 1695 to finish, with coquina cut from the island across the bay. The city had 14,329 residents in 2020, and that count rose from 12,975 in 2010, which means more homes than ever need upkeep. If you own a home here, request your free estimate.
Henry Flagler finished the Ponce de Leon Hotel in 1887, and it opened in 1888. The Bridge of Lions, completed in 1927, links downtown to the island. The last major hurricane to hit the city directly was Dora in 1964, so most homeowners today have only seen floods, not a direct hit. If you are near any of these landmarks, call (386) 337-3172 and name your street.
Outside the old blocks, St. Augustine spreads along creeks, marsh and the bay. Salt Run, Oyster Creek and Hospital Creek are all on the city's list of waters that matter for flooding. A yard near any of them sees damp air and salt more than a yard on a rise. If that sounds like your street, request your free estimate and say which creek is closest.
Frequently Asked Questions
Is it good to seal pavers in Florida, and does St. Augustine change the answer?
Yes, for most homes. A Jacksonville paver company says Florida sealing reduces UV fade, joint washout and mildew. St. Augustine's rain and tides make joint washout a real concern. Sealing locks sand in and keeps water out of the seams.
Can you pressure wash pavers in St. Augustine?
Yes, within limits. A trade supplier says more than 3,000 PSI on standard concrete pavers risks stripping the surface. Joint sand often has to be replaced afterward, and old walls call for a softer wash. Ask which pressure the contractor plans to use, and ask how close the wash will get to walls.
How long do paver sealers last near St. Augustine's bay and river?
Expect a coat to be quoted at two to five years by most local companies. A St. Augustine company says salt air can shorten it to two or three years near the water. Beading water means the coat still works, and soaking water means it is time to plan the next one.
Will dish soap clean my pavers, or is a contractor wash better?
Soap handles light dirt only. A contractor wash also deals with algae, silt and old film, and then replaces joint sand. Sealer needs a surface that is clean and dry.
How much does paver sealing run per square foot in St. Augustine?
Plan on $1.50 to $3.00 per square foot to clean, sand and seal, per companies in this region. Silt, old coats and tight lots can push a job higher. Ask for the square footage in writing.
Do I need approval to change pavers in a St. Augustine historic district?
It depends on your address. The city's pages do not say sealing needs approval. A quick call to city staff before work begins settles the question. Have your address and the surface ready.
Does flooding change how St. Augustine pavers are cleaned?
Yes. Floodwater leaves silt that must be washed off first. The city says Matthew and Irma flooded Davis Shores, Lincolnville and other areas, and sealer would trap the silt. Mention past flooding at the first visit.
Can a new coat go over the sealer already on my pavers?
That depends on what the old sealer is. The two sealer types do not mix, so the contractor identifies the old product first. A failed coat may have to be stripped, and stripping adds work and cost.
How soon can I drive on newly sealed pavers?
Plan on about a day, according to one Jacksonville company. Foot traffic usually comes sooner. Damp air can stretch the time, so ask the contractor. Pets and bikes should stay off too.
Ready for a Free Estimate in St. Augustine?
Call (386) 337-3172 and tell us about your pavers.
Free, no obligation