Wet feet, bright color and joints that stay full
Pool Deck Paver Sealing in Bunnell, FL
Ask for a free pool deck paver sealing estimate in Bunnell by calling (386) 337-3172.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can a Bunnell pool deck get sealed on a short schedule?
Yes, a local contractor seals pool deck pavers in Bunnell, FL, and a reply comes within 1 business day, often the same afternoon. The estimate costs nothing and booking is up to you. To start, call (386) 337-3172.
Picture the deck behind your house on a Saturday: sunscreen rings, a green edge under the cage, joints sitting low and color gone chalky. A wash, fresh sand and a low-sheen coat can make that deck look new again and easier to hose down. Tell the contractor how many people use the pool and how often the kids run across it when you request your free estimate.
Which towns around Bunnell can get a pool deck estimate?
A local contractor covers Bunnell and the towns linked below, with a page for each one. If your road is missing from the list, call (386) 337-3172 and ask about it.
Do pavers around a Bunnell pool need sealer at all?
Not to stay in place, but a deck without sealer shows every spill. A pool deck takes sunscreen, chlorine, leaf litter and wet feet in a way a driveway never does. A coat keeps most of that on the surface where a hose can reach it. To compare a coated deck with your own, request your free estimate.
Flagler County has about 55,565 housing units, and 78.5 percent of the occupied ones are owner-occupied, according to Wikipedia. That means most pools here belong to people who plan to keep them for a while. A deck that holds its color is part of that plan. For a visit to look at yours, call (386) 337-3172.
How do chlorine and salt water change the sealer choice?
Pool chemicals reach the deck through splash and drips, so the product matters. A Volusia County company lists a chlorine-resistant sealer for pool decks and travertine-safe products for stone. Ask which product is going on your deck and what the maker says about pool chemicals. To hear the answer first, call (386) 337-3172.
A salt-water pool raises the stakes. National Sealing, a sealer company, claims that salt water and pool chemicals break down penetrating sealers in 6 to 12 months. That is one company's claim, so treat it as a reason to ask questions, not as a rule. Bring your pool type up when you request your free estimate.
| Question to ask | Why it matters on a pool deck |
|---|---|
| Is the sealer rated for pool chemicals? | Splash carries chlorine onto the surface every day. |
| Is it film-forming or penetrating? | The two wear and feel different underfoot. |
| Is a non-slip option offered? | A Volusia County company lists one for pool decks. |
| What sheen goes on? | Unilock says matte is safer than high gloss when wet. |
Questions come from the sealer notes of the sources named above, not from a rule that fits every deck.
Will a sealed pool deck be slippery when wet?
It can be, which is why the finish deserves a plain conversation. Unilock, a paver maker, says high-gloss sealer can be slippery when wet and that a matte or low-gloss finish is the safer pick. Alliance, a sealer maker, rates the wet look as slightly slippery, the satin look as less so and the natural look as not slippery. To pick a finish for bare feet, call (386) 337-3172.
Grip add-ons exist, but they have limits. National Sealing says sand mixed in for grip wears down within a year, and one Volusia County company offers a non-slip additive as an option. Ask how long each lasts and how it feels on a toddler's feet. Put the question on your list when you request your free estimate.
What do screen enclosures and sprinkler heads do to a Bunnell deck?
Bunnell sits in a humid subtropical climate, and Wikipedia lists its Koppen type as Cfa. A cage keeps rain off but also keeps shade and damp air on the corners. Green film then forms along the pavers closest to the screen frame. To point out your worst spots, call (386) 337-3172.
Garden beds beside a pool are usually watered by sprinkler heads. Iron is common in Florida well water, UF/IFAS says, and it leaves rust where the spray lands. Rust on a deck should be treated before sealer goes on, because the coat will lock the stain in place. Mention a well when you request your free estimate.
What does pool deck paver sealing cost in Bunnell?
A Volusia County paver company lists pool decks at $1.75 to $3.00 per square foot and says its typical decks run 400 to 1,000 square feet. The table below applies that rate to four sizes. The wash, sand and sealer are all part of those rates. For a figure based on your own deck, request your free estimate.
A bid well under that range often leaves something out. Ask whether the joint sand is included, whether stains are treated and how many square feet were measured. Holding a quote already? Call (386) 337-3172 and compare the lines.
| Deck size | Typical example | At $1.75 to $3.00 per sq ft |
|---|---|---|
| 400 sq ft | Small kidney-shape pool with a narrow deck | $700 to $1,200 |
| 600 sq ft | Standard screened pool and deck | $1,050 to $1,800 |
| 800 sq ft | Larger deck with a seating area | $1,400 to $2,400 |
| 1,000 sq ft | Wide deck with a spa and lounge space | $1,750 to $3,000 |
The rate is the pool deck range a Volusia County paver company published for November 2026. Your contractor sets the actual price after seeing the deck. Leveling sunken pavers and stripping failed sealer usually cost extra.
When in the day and year can a pool deck be sealed?
Weather sets the date. Unilock says to apply between 50 and 90 degrees, with 75 the sweet spot, and with clear skies for 24 to 48 hours beforehand. Pavers that are too hot can stain and peel, which rules out a bright August afternoon. Early morning and mild days are usually the better slots. To pick a window, call (386) 337-3172.
Your sprinklers are part of the schedule too. The regional water management district puts Flagler County on one watering day a week during Eastern Standard Time and two during daylight saving time. Unilock says to keep automatic sprinklers off after sealing, because trapped water can cause white marks. Ask the contractor to pick a day that is not your watering day when you request your free estimate.
How long until my family can use the deck again?
Plan on a full day before feet and chairs, then give the coat time to cure. Alliance says to wait 24 hours before walking or driving on sealed pavers, and Unilock says the sealer can take up to 48 hours of dry weather to cure. Rain in that window can push everything back. Ask for a keep-off time in writing when you request your free estimate.
What if some pool deck pavers have sunk or lifted?
Sealer cannot lift a low paver or close a gap, so shifted pavers are fixed first. Bunnell sits about 10 feet above sea level, and Flagler County averages close to 50 inches of rain a year, according to News4Jax. Water that runs under a deck edge can wash sand out and leave a dip. Point out any puddling spots when you call (386) 337-3172.
What do sealed pool decks look like in Bunnell?
What is the process for sealing a Bunnell pool deck?
Most jobs follow the same five steps, with extra care around the water. To put a day on the calendar, call (386) 337-3172.
1. Walk the deck with the homeowner
The contractor measures the deck, notes the spa edge, planters and drains, and checks for rocking pavers. The notes become the price and the order of work.
2. Protect the water and the screens
Pool water, screen frames and nearby plants get covered or rinsed so cleaner and sealer stay where they belong.
3. Wash and treat stains
Algae treatment goes on the damp corners first. Rust spots from sprinkler heads and dark rings from planters get their own cleaners, tried in a small spot.
4. Dry, then refill the joints
The deck dries for at least a day, sand goes into the gaps and extra sand is swept off. Wet sand will not set, so the dry time is not skipped.
5. Seal and set the keep-off time
A low-sheen coat goes on in one even pass, with a grip option if you asked for it. You are told when the deck is ready for feet, chairs and the sprinkler timer.
Common questions about pool deck paver sealing in Bunnell
How much to seal a pool deck?
A Volusia County paver company lists pool decks at $1.75 to $3.00 per square foot, which is a little above its $1.50 to $2.50 driveway rate. On a 600 square foot Bunnell deck that works out to roughly $1,050 to $1,800. The wash, the joint sand and any stain treatment should show up as lines on the quote.
Is it good to seal pavers in Florida?
For a pool deck it usually pays off. The sun, the humidity and the splash water all work on the surface every day, and a coat makes the deck easier to rinse. The trade is a repeat job every few years, so ask for a finish with some grip.
Why is paver sealing so expensive?
Most of the bill is prep, because a deck has to be cleaned, dried and refilled with sand before any sealer goes on. A deck with a screen enclosure, a spa edge and planters also takes longer to work around than an open slab. A written quote that itemizes the work is easier to compare.
Do pavers around a pool need to be sealed?
They do not need it to stay in place, but sealing helps with color, stains and the sand in the joints. A pool deck gets sunscreen, chlorine, leaves and wet feet, so it collects marks faster than a front walk. A Volusia County company offers a chlorine-resistant formula for pool decks, which tells you the chemicals are a known issue.
What sealer finish is safest around a pool in Bunnell?
A low sheen is the safer pick. Unilock, a paver maker, says high gloss can be slippery when wet and that matte is safer. Alliance, a sealer maker, rates the wet look as slightly slippery and a satin look as less so. Ask about a non-slip additive, which one Volusia County company lists as an option for pool decks.
How long after sealing can I use my pool deck?
Plan on a full day before feet and furniture go back. Alliance says to wait 24 hours before walking or driving on a sealed surface, and Unilock says the coat can take up to 48 hours of dry weather to cure. The label on the exact product sets the real times.
Does well water from my sprinklers stain a Bunnell pool deck?
It can. UF/IFAS notes that iron is common in Florida well water and that rust deposits follow wherever it sprays, and a pool deck sits close to garden beds and sprinkler heads. Orange spots need a rust remover before sealing, because sealer locks a stain in.
Can I seal the deck if my screen enclosure shades part of it?
Yes, and the shaded part is often the part that needs help first. Shade keeps pavers damp longer in a humid climate, so green film shows up there. The contractor can wash that section more slowly and let it dry fully before the coat goes on.
Should the pool water be treated differently on the day of the job?
Ask the contractor how the pool will be covered or protected from rinse water and sealer, and what that means for your pump and skimmer. The answer should be plain and specific. If it is vague, ask again before you book.
Want the pool deck ready for summer?
Fill in the short form or call, and you hear back within 1 business day, often much faster.
Free, no obligation